Paving Scope of Work Generator

SCOPE OF WORK



The following scope of work describes the services to be provided by Contractor:
TACK COAT — Per Square Yard
Contractor shall apply an asphalt emulsion tack coat (CSS-1h or approved equal) to all existing or prepared surfaces prior to placing new asphalt. Application rate shall be 0.05–0.15 gal/SY as appropriate. Tack coat shall be applied uniformly, allowed to break/cure, and new asphalt placed prior to tack coat being tracked or contaminated.

ASPHALT OVERLAY — Per Square Yard
Contractor shall place and compact hot-mix asphalt (HMA) overlay over the prepared surface at the project location. Mix design, lift thickness, and binder grade shall meet applicable state/local specifications for standard commercial traffic. Compaction shall achieve a minimum of 92% of theoretical maximum density (TMD). Longitudinal joints shall be staggered between lifts. Finished surface shall be smooth, free of bumps, and drain properly.
EXCLUSIONS
The following items are specifically excluded from this scope unless noted above: underground utility work, environmental remediation, permit fees (unless noted), landscaping restoration, concrete work not listed above, and any work not explicitly described herein.
WARRANTY
Contractor warrants all workmanship against defects in materials and installation for a period of one (1) year from the date of substantial completion. Warranty does not cover damage caused by acts of nature, improper use, or third-party modifications.